M-SED directional valves are solenoid shut-off directional valves used to control the flow, stop and direction of oil.

It consists of a valve body, solenoid, and shutoff.

Manual emergency operation allows the valve to be operated when the solenoid is not energized. Basic functions: - Spring (5) - Spring (6) - Spring (7) - Spring (8)

The spring setting determines the initial position of the valve. In case of power failure, the “UK” type valve is open and the “CK” type valve is closed. The valve chamber, located behind the shut-off piece, is connected to the port P and is sealed off from the port T. The valve is therefore pressure-balanced with respect to the operating forces (solenoid and spring).

Thanks to the shutoff member, the valve can be used at operating pressures of up to 350 bar in ports P, A and T and can pass flow in both directions!

In the initial position, the shut-off member is pressed against the seat by the spring and in the switching position the solenoid pushes it against the seat. In this way, a leak-free seal is achieved.

Brand: Rexroth
Model:M-3SED10CK1X/350CG110N9K4
Function type: directional valve
Operation method: hydraulic
Connection method: plate connection
Control method: electro-hydraulic proportional valve
Material: carbon steel
Suitable medium: oil
Nominal pressure: 350MPa
Nominal diameter: 6mm
Rated flow rate qn：1000L/min
Pressure adjustment range: 315MPa
Unloading pressure: 50MPa
Use of oil temperature range: 50-300 ℃
Weight: 2kg
Role: relief valve proportional valve
Drive: electromagnetic